Complexation-flocculation of organic contaminants by the application of oxyhumolite-based humic organic matter

Control of hazardous organic micropollutants is a challenging water quality issue. Dissolved humic organic matter (DOM) isolated from oxyhumolite coal mined in Bohemia was investigated as a complexation agent to remove polycyclic aromatic hydrocarbons (PAHs) and functionalized phenols from water by a two-stage process involving complexation and flocculation. After the formation of humic-contaminant complexes, ferric salts were added resulting in the precipitation and flocculation of the DOM and the associated pollutants. Flocculation experiments with ferric ion coagulants indicated that precipitation of oxyhumolite DOM together with the complexed contaminants occurred at lower ferric ion concentrations than with the reference DOM in acidic environments (pH approximately 3.5). The complexation-flocculation removal rates for non-reactive PAHs characterized by small localization energies of pi-electrons correlated well with the complexation constants. On the other hand, the combined complexation-flocculation removal rates for activated PAHs including trans-stilbene, anthracene and 9-methyl anthracene, as well as functionalized polar phenols, were higher than predicted from the complexation coefficients. Methodological studies revealed for the first time that the ferric ion coagulant contributed to enhanced removal rates, most probably due to ferric ion-catalyzed pollutant degradation resulting in oxidized products.     

Auftreten von PCDD/PCDF in Brandfällen

Over the last years, polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/PCDF) have been identified in the soot of various accidental fires at concentrations which have made an extensive reconstruction of the buildings necessary. In these cases, dioxin precursors like polychlorinated biphenyls (PCB) or large amounts of other halogenated organic compounds like PCV cable coatings were involved. Dependent on the circumstances of the fire and the materials burnt, the levels of contamination and the congener pattern of the PCDD/PCDF in the soot were different. The analytical results from various accidental fires were evaluated and compared with laboratory data. A hierarchical cluster analysis supports the interpretation of the data and shows that the contamination of the soot from the fire in the Düsseldorf Airport in April 1996 was a mixed contamination primarily caused by PCB and PVC.     

Cytostatische Nicht-Platinmetall-Komplexe: neue Perspektiven für die Krebsbehandlung?

Non-platinum-group metal antitumor agents are represented by inorganic and organometallic compounds which contain either main-group metals such as gallium, germanium, and tin, or transition metals such as titanium, vanadium, iron, copper, and gold. Their antiproliferative properties have been detected during the past years, the spectrum of antitumor activity not being identical with that of cytostatic platinum complexes. In the case of germanium complexes, the antitumor activity is obviously not based on direct cytotoxic effects, but on host-mediated immunopotentiating mechanisms. The toxic properties of most non-platinum-group metal antitumor agents differ fundamentally from those of platinum compounds. Thus, non-platinum-group metal antitumor agents may open new perspectives for the clinical therapy of human malignancies.     

Quantification of polychlorinated biphenyls in plastic granulates from the recycling of cables - Reference materials and interlaboratory comparison

A procedure for the quantification of the PCB marker congeners 28, 52, 101, 138, 153, 180 in plastic waste form the recycling of cables in the range of content between 0.1 mgkg(-1) and 20 mgkg(-1) was validated. Representative reference materials for laboratory analyses were produced using granulates from different recycling processes. The method development included aspects of grinding, sieving, homogenising as well as the comparison of extraction methods and chromatographic conditions. The validated procedure foresees grinding of the technical sample to an upper particle size limit of 0.50mm followed by extraction with an unpolar solvent such as n-hexane and gas chromatographic determination. LOD and LOQ for individual congeners ranged between 0.01 mgkg(-1) and 0.08 mgkg(-1). Electron capture detection (ECD) and mass selective detection (MS) were equivalent if chromatographic conditions were appropriately selected. The application of MS was advantageous in presence of significant amounts of interfering components which have been found in some cables. Three reference materials containing the marker congeners in the range of 0.1 mgkg(-1)-5 mgkg(-1) were submitted to a final validation intercomparison with 23 selected field laboratories using the developed method. Relative reproducibility standard deviations varied between 15% and 33%.     

Passive air sampler as a tool for long-term air pollution monitoring: Part 1. Performance assessment for seasonal and spatial variations

The potential of passive air sampling devices (polyurethane foam disks) to assess the influence of local sources on the quality of the surrounding environment was investigated. DEZA Valasske Mezirici, a coal tar and mixed tar oils processing plant, and Spolana Neratovice, a chemical factory with the history of high production of organochlorinated pesticides (OCPs), were selected as the point sources of PAHs, and OCPs, respectively. Levels of PCBs, OCPs and PAHs were determined for all sampling sites and sampling periods. The study brought useful data about the air concentrations of POPs in the investigated regions. More important, it provided information on the transport and fate of POPs in the vicinity of local sources of contamination useful for the estimation of their influence. Very good capability of passive samplers to reflect temporal and spatial fluctuation in concentrations of persistent organic pollutants in the ambient air was confirmed which makes them applicable for monitoring on the local scale.